人人天天夜夜日日狠狠資料

溫度補償的含水率監測儀

人人天天夜夜日日狠狠名稱: 溫度補償的含水率監測儀
人人天天夜夜日日狠狠型號: WCM7300
人人天天夜夜日日狠狠文檔: 無相關文檔

簡單介紹

溫度補償的含水率監測儀在原油、烃类或其他*高25%的到1000PPM以下的低介电液中,专为客户提供*高的灵敏度、分辨率以及含水量的测量精度。WCM7300带溫度補償的含水率監測儀的增强数字信号处理和全过程温度补偿两项技术的使用大大提高了这个设备。


溫度補償的含水率監測儀  的詳細介紹
WCM7300溫度補償的含水監測儀
7300 WCM測量人人天天夜夜日日狠狠的全過程中,溫度補償並適時計算出正確的含水監測值提供一個真正的含水監測值或S&W的監測值,在任何溫度下並*高可達160°F。探头尺寸可从2”至12”。4-20mA和0-5伏的输出可用于远程读取。含水監測值、过程温度或探头电气值可以通过使用附带磁铁来操作内部**开关直接查看而不需除去端盖。

Features:

NACE Adaptable - Can be modified for use in sour service.


Applications:

LACT (Lease Automatic Custody Transfer) Units
Detect and provide relay contact closure that can be used to reroute oil that has excess S&W.
Pipeline Loading
Monitor transfer of petroleum/condensate products from loading facilities.
Dehydration Equipment
Determine and enhance equipment efficiencies, by monitoring the product and indicating water content.
Fuel Oil Monitoring
Determine contamination of fuel oil by condensation, or other external factors, before entry to engine.
Storage and Treating Facilities
Monitoring and early detection of undesirable conditions as well as interface detection during de-watering of storage
tanks.

Measurement/Monitor Specifications:

Power Supply
20-30 Vdc +/-10% @ nominal, 100 mA max.
S&W Full Scale Range
0-25% Field adjustable to 0-5%, 0-10%, etc.
Accuracy
Is defined as the variance observed between the 7300 reading and the water grindout of the oil.
Normal variances are:
+/-.05 from 0 to 5% water
+/-.1 from 5 to 10% water
+/-.15 from 10% to 15% water
+/-.2 to .25 from 15 to 25% water
Displays
One line 16 character, alphanumeric LCD showing by selection:
Water Cut
Process Temperature
Probe Electrical Value
Red/Green LED showing good oil, bad oil, or by passing,condition.
Process Connections
Flange, grooved, MNPT.
Pressure Ratings
As per Flange selection, 1440 psig max. (Others by special order)
NPT - 1440 psig max.
Victualic grooved - 350 psig
Enclosure
NEMA 7 explosion-proof, Class I, Division 2, Group C and D.
人人天天夜夜日日狠狠留言
標題
人人天天夜夜日日狠狠
人人天天夜夜日日狠狠人天天夜夜日日狠狠
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!
掃描二維碼訪問